Filter
Top Products
91
ready to transmit on that Channel.
- or -
If the called radio has been set to Standby Mode, a message
appears and your radio will return to normal operation.
Group Call
1. Select an open (unused) working Channel.
2. Press [CALL/LIGHT].
3. At the
DSC Menu, use S and T to select Group.
Press [ENTER].
4. Press [ENTER]. You will see the
Attention screen. Use W or
X to select
Yes and press [ENTER] to make the call. Or, select
No and press [ENTER] to cancel the call.
5. After you press [ENTER], the MYSTIC returns to the Channel
Display screen.
All Ships
1. Select an open (unused) working Channel.
2. Press [CALL/LIGHT].
3. At the
DSC Menu, use S and T to select All Ships.
Press [ENTER].
4. At the
All Ships menu, use S and T to select Urgency,
Safety, or Routine.
5. Press [ENTER]. You will see the
Attention screen. Use W or X
to select
Yes and press [ENTER] to make the call. Or, select No
and press [ENTER] to cancel the call.
Note:
ROUTINE
calls tune to the previously selected Channel.
When sending either an
URGENCY or SAFETY message, all
radios will automatically move to Channel 70 until all of the
data is received.
After selecting
URGENCY or SAFETY ALL SHIPS call is
transmitted, the MYSTIC will switch to Channel 16. You
should wait a few minutes before transmitting the ALL SHIPS
call information.
Mystic OM.book Page 91 Wednesday, October 22, 2003 8:59 PM