Filter
Top Products
41
3. At the
VHF Menu, select MMSI Entry, and press [ENTER].
4. At the
MMSI Entry screen, select Group MMSI and press
[ENTER].
5. Press [ENTER]. Enter the
Group MMSI number using the same
technique as you did for
User MMSI.
6. When you have entered all the digits, press [ENTER]. The
highlight will move to the
OK box. Press [ENTER] to accept the
entry. If you do not want this entry, press X to move the highlight to
the
Cancel box and press [ENTER].
7. The Group MMSI Code is now saved, and the screen returns to
the VHF Menu screen.
DSC Watch
The MYSTIC monitors Channel 70 for DSC Calls (See “Digital Selective
Calling (DSC)” on page 90).
To enable or disable DSC Watch:
1. Press [MENU].
2. At the
Menu screen, select VHF and press [ENTER].
3. At the
VHF Menu, select DSC Watch, and press [ENTER].
4. Select
On or Off and press [ENTER]. The MYSTIC returns to the
VHF Menu.
5. Press [ESC] to return to the VHF screen.
Note: If the MYSTIC is currently tuned to Channel 70, it will receive
DSC Calls even if DSC Watch is Off. If you send a Distress Call,
the MYSTIC automatically turns DSC Watch On.
Auto Channel Switch
This feature allows you to disable the automatic Channel change that
occurs when you receive a DSC call. This feature is useful when engaged
in Bridge-to-Bridge communication or other safety related calls. When you
have completed these calls, all the incoming Distress and Individual calls
received are available in the Call Log.
To enable or disable the Auto Channel Switch:
1. Press [MENU].
2. At the
Menu screen, select VHF and press [ENTER].
Mystic OM.book Page 41 Wednesday, October 22, 2003 8:59 PM