Filter
Top Products
18
To set the Squelch level:
1. Turn SQ fully clockwise. This raises the
“Squelch Gate” so high that only very strong
signals can get through.
2. Turn SQ fully counterclockwise until you hear
a hiss. This lowers the “Squelch Gate” so that
everything gets through - noise, weak signals,
and strong signals.
3. Turn SQ back clockwise just until the hiss
stops. Now the “Squelch Gate” allows only
signals of the desired strength through.
To listen to a weak or distant station, turn the
knob counterclockwise. If reception is poor,
turn it clockwise to cut out weak transmis-
sions.
Note: If the squelch control is adjusted so you continually hear a
hissing sound, the unit will not scan properly.
Using the MYSTIC keys
Your MYSTIC has 11 keys and a four-way cursor. Of the 11 keys, 6 are
dual-function. That is, you press that key to access one function, and you
press and hold
that key to access another.
Note: Example:Press [WX/ALERT] to change from the VHF Channels
to the Weather Channels. Press and hold
[WX/ALERT] to set
the Weather Alert Mode.
The cursor keys (STWX) are used to: change Channels, alternate
Navigation screens, and select items in the Menu screens.
The [MENU] key is used to access the Menu screen. When you are at the
Menu screen, use ST to select the next Menu, and press [ENTER].
That will take you to the next Menu, or the next selection to modify. To
stop from selecting any item, press [ESC].
Mystic OM.book Page 18 Wednesday, October 22, 2003 8:59 PM