Filter
Top Products
58
3. At the Setup Menu, use S and T to
highlight the setting you want to change
and press [ENTER].
You can change the default setting for any
of the following:
z RF Select
z Initialize
z Nav Screens
z Coord System
z Map Datum
z Elev Mode
z Time Format
z Nav Units
z North Reference
z Daylight Savings
z Light Timer
z Beeper
z Clear Memory
z NMEA
z Baud Rate
z Simulate
z Language
At this menu, you can change the default settings. When you select
any of the items, you will see a different selection menu.
Use S and T to highlight the value you want
and press [ENTER]. In some cases you have a second list to choose
from. Use the same procedure to select the value. When you are
finished with all the changes, press [ESC] to return to the Channel
Display. Each of the settings are discussed in the following
paragraphs.
RF Select
The procedure for RF Select is covered on page 33.
Initialize
You can initialize the MYSTIC at any time. Select Initialize.
When you press [ENTER], the unit will initialize from the beginning, as
described on page 55.
Setup Menu
RF Select
Initialize
Nav Screens
Coord System
Map Datum
Elev Mode
Time Format
Nav Units
Daylight Saving
Light Timer
Beeper
North Reference
Mystic OM.book Page 58 Wednesday, October 22, 2003 8:59 PM