Filter
Top Products
Lassen-SK8 Embedded GPS Module C-29
Trimble ASCII Interface Protocol (TAIP)
Most Placer family sensors are set by default to report the PV message once every 5
seconds. To schedule the PV message from vehicle 1234 to respond once every 10
seconds, starting at 5 seconds after the top of the hour, use the following command:
>FPV00100005;ID=1234<
The sensor will check the ID included in the message for a match with its own and then
reschedule the PV message. At the next scheduled time, the sensor will respond with:
>RPV15714+3739438-1220384601512612;ID=1234;*7F<
*
Note – The time given in the message is the time of the last GPS fix (04:21:54 GPS), not
necessarily the time of the message response. If the time of last fix is 10 or more seconds
old, the age flag will be set to 1.