Filter
Top Products
A-60 Lassen-SK8 Embedded GPS Module
Trimble Standard Interface Protocol
A.17.60 Report Packet 0xBB
TSIP Packet 0xBB is used to report the GPS Processing options. See Table A-68.
A.17.61 Command Packet 0xBC
TSIP Packet 0xBC is used to query the port characteristics. In query mode, Packet 0xBC is
sent with a single data byte and returns Report Packet 0xBC. See A.3 for information on
saving the settings to non-volatile memory.
TSIP Packet 0xBC is used to set the communication parameters on Port 1 and Port 2. The
table below lists the individual fields within the Packet 0xBC.
Table A-69. Command Packet 0xBC Port Characteristics Query Field
Descriptions
Byte # Item Type Value Meaning
0 Port Number BYTE 0
1
FF
Port 1
Port 2
Current port
Table A-70. Command Packet 0xBC Field Descriptions
Byte # Item Type Value Meaning
0 Port to Change BYTE 0
1
0xFF
Port 1
Port 2
Current port
1 Input Baud Rate BYTE 0
1
2
3
4
5
6
7
8
9
None
110 baud
300 baud
600 baud
1200 baud
2400 baud
4800 baud
9600 baud
19200 baud
38400 baud
2 Output Baud Rate BYTE As above As above
3 # Data Bits BYTE 2
3
7 bits
8 bits
4 Parity BYTE 0
1
2
None
Odd
Even
5 # Stop Bits BYTE 0 1 bit
2 bits