Trimble Outdoors SK8 GPS Receiver User Manual


 
A-38 Lassen-SK8 Embedded GPS Module
Trimble Standard Interface Protocol
*
Note – See the associated superpacket output, described later in this appendix. Packet
8E must be used to specify which superpacket is to be output.
*
Note – Automatic output of 5 A messages is supported in the Lassen-SK8 for backwards
compatibility with older TSIP applications.
Byte
Parameter
Name
Bit
Position
Default
Bit
Value Option
Associated
Packet
2 timing 0 0 time type
0: GPS time
1: UTC
0x42, 0x43,
0x4A, 0x83,
0x84, 0x56,
0x8F-17,
0x8F-18
1 0 reserved
2 0 reserved
3 0 reserved
4 0 reserved
5-7 0 not used
3 Auxiliary PR
meas.
0 0: off 0x5A
1 0: raw 0: raw PR’s in 5A
1: filtered PR’s in 5A
0x5A
2 reserved
3 0: off
1: on
output dBHz instead of
AMU
0x5A, 0x5C,
0x47,
0x6F
4-7 reserved
Table A-38. Command Packets 0x55 and 0x35 Data Descriptions
(Continued)