Filter
Top Products
997-01530-01, Rev. C-25, Jan 2008 35
2
5
1
SSSSSSSSSSSS SSSS SSSSSS SSSSSSS S SSS SSSSSSS
where:
For example, to set the time zone offset, enter:
F1 –8:00<CR>
XL-GPS responds:
OK<CR><LF>
To verify the change, enter:
F1<CR>
XL-GPS Responds:
F1 –8:00<CR><LF>
F2 – 12/24 Hour Format
Use function F2 to apply a 12 or 24-hour format to the time output by:
•
“keypad Interface” on page 25
• “F8 – Continuous Time Once-per-Second” on page 42
• “F9 – Time On Request” on page 44
• “F90 – Code Output Configuration” on page 72
F2 affects how all four types of time (Local, Standard, UTC, GPS) appear when displayed or output.
The 12-hour format counts hours from 1 to 12 twice per day, like a conventional wall clock. The 24-hour
format counts hours from 1 to 24 once per day. For example, in the 24 hour format, 18:00 is equivalent to
6:00 PM in the 12-hour format (i.e., 18:00 – 12:00 = 6:00 PM).
F = ASCII character F
01 = function number
<S> = ASCII space character (one or more)
<SIGN> = either no character or + for positive offsets or – for negative offsets
<HH> = one – or two-digit hours offset from 00 to12 hours
: = ASCII character for a colon
<MM> = two-digit minutes offset
<CR> = carriage return character
<LF> = line feed character