Filter
Top Products
997-01530-01, Rev. C-25, Jan 2008 127
2
5
1
SSSSSSSSSSSS SSSS SSSSSS SSSSSSS S SSS SSSSSSS
The XL-GPS Fault Group
Note: For the figures in this chapter, substitute “xlgps” for “xli”.
The XL-GPS systemAlarmData group defines SNMP traps and cannot be directly retrieved by the SNMP
manager. When a system alarm event occurs an SNMP trap alarmSystemNotification is sent to the
SNMP managers previously configured to receive traps. Included in the trap message are the variables
contained in the systemAlarmData group: IP address, timestamp, alarm code, and the F73 status string.
systemFault
= 1
systemAlarmData
= 1
systemFault
Config
= 2
systemFault
ConfigData
= 1
systemFault
ConfigMasks
= 2
alarmDataIpAddr = 1
alarmDataTimeStamp = 2
alarmDataCode = 3
alarmDataStatus - = 4
Descriptor
systemFault
History
= 3
faultPllSynthesizer = 1
faultLpnPll = 2
faultPrimaryGPS = 3
faultSecondaryGPS = 4
faultIRIG = 5
faultAuxRef = 6
faultPrimaryPower = 7
faultSecondaryPower = 8
faultRbOsc = 9
faultTimeErrorThreshold = 10
faultClockLockStatus = 11
faultOscillatorTuning = 12
m askPllSynthesizer = 1
maskLpnPll = 2
maskPrimaryGPS = 3
maskSecondaryGPS = 4
maskIRIG = 5
maskAuxRef = 6
maskPrimaryPower = 7
maskSecondaryPower = 8
maskRbOsc = 9
maskTimeErrorThreshold = 10
maskClockLockStatus = 11
m askOscillatorTuning = 12
configDataLatch = 1
configDataLatchClear = 2
configDataThreshold = 3
configDataTimeout = 4
configDataPowerOn - = 5
Suppress
xliSystem
= 1
systemStatus
= 2