Filter
Top Products
26 997-01530-01, Rev. C-25, Jan 2008
SSSSSSSSSSSS SSSS SSSSSS SSSSSSS S SSS SSSSSSS
1
Time Display related functions:
• Select between the 12 or 24 hour format displayed: “
F2 – 12/24 Hour Format” on page 35.
• Select between Local, Standard, UTC, and GPS time: “
F69 – Time Mode” on page 61.
Time related functions:
•
“F1 – Time Zone Offset” on page 34
• “F3 – Time & Date” on page 37
• “F66 – Daylight Saving Time (DST) Mode” on page 58
Status Display
The Status Display comes up automatically when the XL-GPS is rebooted. To manually switch from
another display to the Status Display, press STATUS button on the keypad. The keypad appears as
follows:
where:
Menu Display
To use the XL-GPS functions that are available from the keypad, press the MENU button on the keypad.
“
Function Summary” on page 32 lists which functions are available from the Menu Display.
Pressing the MENU key on the front of the XL-GPS displays the first function, F1: TIME ZONE OFFSET:
LOCKED = System Clock Status is Locked or Unlocked to the current reference source. See Clock
Status in
“F73 – Alarm Control / Status” on page 64
* = A reference source input has been configured, but is not available. (Note: When using
GPS, “*” may remain visible for up to 13 minutes) See
“F119 – GPS Receiver
Configuration” on page 104
GPS = Shows that the clock is locked to GPS.
UTC =
Time display mode: GPS, UTC, Standard, or Local (
“F69 – Time Mode” on page 61)
200:21:24:09 2002 =
The time, in DDD:HH:MM:SS YYYY format (
See “Time Display” on page 25.)
LOCKED ∗ GPS
UTC 200:21:24:09 2002
F1:
TIME ZONE OFFSET