Filter
Top Products
90 997-01530-01, Rev. C-25, Jan 2008
SSSSSSSSSSSS SSSS SSSSSS SSSSSSS S SSS SSSSSSS
1
SYMMETRICOM GPS DEVICE.
XL-GPS
INITIALIZATION SUCCESSFULLY COMPLETED.
>
F100 P – Change User Password
Use function F100 P to change a user password. In a network port session, F100 P changes the
password of the user you logged in as; operator or guest. In a serial port session, F100 P changes the
password of the operator user. See “
Command Line Interface” on page 29.
Valid password size is from no characters to 64 characters. If more than 64 characters are entered,
F100 P truncates the string to 64 characters. When selecting a password, use appropriate levels
password security for the XL-GPS’s operating environment. Examples include:
• Mixing random alpha and numeric characters
• Avoiding words or word combinations that can be found in a dictionary
To change the user password, enter:
F100<S>P<CR>
where:
XL-GPS responds:
ENTER NEW USER PASSWORD:
When you enter the new password, XL-GPS responds:
CONFIRM NEW USER PASSWORD:
Enter the same new password again, to confirm the spelling. If the same new password has been
entered twice, XL-GPS responds:
OK<CR><LF>
In this case, the new password will be used for the next login. However, if the new password is entered
differently the second time, XL-GPS responds:
ERROR: PASSWORDS DO NOT MATCH. NEW PASSWORD REJECTED.
F = ASCII character F
100 = unit function number
<S> = space
P = specify Password command
<CR> = input line terminator