Filter
Top Products
997-01530-01, Rev. C-25, Jan 2008 95
2
5
1
SSSSSSSSSSSS SSSS SSSSSS SSSSSSS S SSS SSSSSSS
Sample request:
F110<CR>
XL-GPS responds (example):
F110 TIET 50 POSITIVE<CR><LF>
To the configure TIET input with a different impedance value, enter (example):
F110 TIET 100K POSITIVE<CR>
XL-GPS responds:
OK<CR><LF>
To obtain TIET measurement from J1, enter:
F110 TIET TIME<CR>
XL-GPS responds:
OK<CR><LF>
.xxxxxxxxx<CR><LF>
(Time Interval (display continues until function termination with Ctrl+C)
Or, (example):
F110 TIET EVENT<CR>
XL-GPS responds:
OK<CR><LF>
ddd:hh:mm:ss.xxxxxxxxx<CR><LF>
(Event Timing display continues until function termination with Ctrl+C)
F110 responds "F110 TIET OPTION IS NOT ENABLED" to any of the commands above if the TIET
option has not been enabled by the operator using the F126 Options Key Entry command.
<Impedance> = 100K, 50
<CR><LF> = line terminator, either a carriage return and line feed for output strings or a
carriage return only for input strings.
F = ASCII character F.