Filter
Top Products
132 997-01530-01, Rev. C-25, Jan 2008
SSSSSSSSSSSS SSSS SSSSSS SSSSSSS S SSS SSSSSSS
1
system. Click the <OK> button again to confirm the action.
4. Click the <Close> button to exit the “Load/Unload MIBs:SNMP” dialogue box.
Configure Traps
1. Select the menu item “OptionsEvent Configuration”. A pop window titled “Event Configuration” will
appear.
2. In the “Event Configuration” window, scroll through the “Enterprises” list to the bottom and select
“XL-GPS”.
3. In the “Events for Enterprise XL-GPS” select the “alarmSystemNotification” entry. Then select the
menu item “Edit->Events->Modify…”. A popup titled “Modify Events” will appear.
4. In the “Modify Events” popup click the “Event Message” tab. Under “Actions” select the “Log and
display in category”. In the “Event Log Message” field, enter “XL-GPS System Trap: $*”. Do not en-
ter the quotation marks.
5. Select the menu item “Options->MIB Application Builder: SNMP”. A popup titled “MIB Application
Builder: SNMP” will appear.
6. In the “MIB Application Builder: SNMP” popup select the menu item “Edit->New…” A popup titled
“New MIB Application” will appear.
7. Enter “xlGpsStatus” in the “Application ID:” field and the “Application Title:” field. Leave “Application
Type:” as “Form”. Click the “Next” button.
8. The title of the popup will now be “New Application Builder – Display Fields”. Click the “Add” button.
A popup titled “New Application Builder / Add MIB Objects will appear”.
9. In the “New Application Builder / Add MIB Objects will appear” popup descend the MIB tree by click-
ing on the plus symbol next to the entries “iso -> org -> dod -> private -> enterprises -> symmetri-
comEnt -> products -> xlGps -> xlGpsSystem -> systemStatus -> systemStatusGeneral”. Select all
items under “systemStatusGeneral”. Do this by clicking on the first item and then holding the “shift”
key while clicking on the last item. Then click the “Add” button. Back up to “xlGps -> xlGpsSystem
-> systemStatus -> systemStatusDetail”. Select all items under “systemStatusDetail” and then click
the “Add” button. Then click the “Close” button.
10. In the “New Application Builder – Display Fields” popup click the “Next” button. In the “Menu Path”
field enter “xlGps->Status”. Click the “Finish” button.
11. Repeat steps 6 – 10 using the “Application ID:” of xlGpsConfig selecting all items under “iso -> org
-> dod -> private -> enterprises -> symmetricomTtm -> products -> xlGps -> xlGpsSystem -> sys-
temFault -> systemFaultConfig” and using the “Menu Path” of “xlGps->Configuration”.
12. Repeat steps 6 – 10 using the “Application ID:” of xlGpsFault selecting all items under ““iso -> org
-> dod -> private -> enterprises -> symmetricomTtm -> products -> xlGps -> xlGpsSystem -> sys-
temFault -> systemFaultHistory” and using the “Menu Path” of “xlGps->Fault History”.