Filter
Top Products
12
ENGLISHFRANÇAISEESPAÑOL
• Foam Element
Remove the element and wash it in a solution of mild detergent and warm water.
Then rinse the element thoroughly in clean water. Allow the element to dry thoroughly.
Apply a tablespoon (6cc) of motor oil to the clean and dry foam element and
squeeze the element several times to distribute the oil evenly throughout the foam.
Then squeeze the foam element in a paper towel to absorb any excess oil. Clean
the air cleaner housing and replace the foam element, air cleaner cover and thumb
screw.
• Dual Element
Wash and clean the foam with a solution of mild detergent and warm water. After
cleaning, let dry. Oil the foam as described above.
Clean paper element by tapping gently to remove dirt and blow off dust. Clean the
paper element at least every 50 hours of operation, and replace element set at least
every 100 hours.
Note:
Clean and replace air cleaner elements more often when operating in dusty
environments. Replace the element if dirt or dust can not be removed
and/or that the element is deformed or deteriorated.
6. Fuel Hose Replacement
Replace the fuel hose every 2 years. If fuel leaks from fuel hose, replace the fuel
hose immediately.
7. Checking bolts, nuts and screws
• Retighten loose bolts and nuts.
• Check for fuel and oil leaks
• Replace damaged parts with new ones.
8. High Altitude Engine Operation
• Please have an authorized Robin America service dealer modify this engine if it
is to be run continuously above 5000 feet. Failure to do so, may result in poor
Use extreme caution when replacing fuel hose; gasoline is extremely fl ammable.
▲
! WARNING