Filter
Top Products
7
ENGLISHFRANÇAISEESPAÑOL
OPERATING THE ENGINE
Starting the Engine
1. Before starting the engine, check each pre-operation step.
2. Open fuel valve.
3. Turn the engine stop switch “ON” (“I” position), as
shown below.
• If the engine is cold or the ambient temperature is low, slide the Choke Lever
fully toward the air cleaner (START position). This will provide the engine with
more fuel to help during cold start situations.
• If the engine is warm or the ambient temperature is warm, slide the Choke Lever
fully toward the fuel tank (RUN position).
Stop Switch Fuel Valve
CLOSE
CLOSE
OPEN
ON
OFF
Choke Lever