Filter
Top Products
Chapter 3: Operation 3-45
Figure 3-47: Successful Save Completion
If the operation fails, the Save Failed message is displayed, see
Figure 3-48.
Figure 3-48: Save Failed Message
Loading Waypoints/Routes from a User Card
CAUTION:
Loading previously saved data to your unit will overwrite all existing
Waypoint and Route data.
➤ To load data from a C-MAP User Card:
1. Press
MARK; the Waypoint soft keys are displayed, see Figure 3-44.
Insert a C-MAP User Card into the lower of the two cartridge slots.
2. Insert a C-MAP User Card into the lower of the two cartridge slots.
USER CARD PRESENT
SAVE COMPLETE
SAVED 2 ROUTE(S) AND
7 WAYPOINT(S)
USER CARD MENU
LOAD WPT/
RTE DATA
FROM CARD
SAVE WPT/
RTE DATA
TO CARD
CHECK
CARD IN
USER SLOT
USER CARD NOT PRESENT
SAVE FAILED
NO OR INCORRECT CARD
ENSURE USER CARD IS CORRECTLY
INSERTED IN THE LOWER SLOT
USER CARD MENU
LOAD WPT/
RTE DATA
FROM CARD
SAVE WPT/
RTE DATA
TO CARD
CHECK
CARD IN
USER SLOT
81167_3.BOOK Page 45 Wednesday, November 21, 2001 2:12 PM