Filter
Top Products
3-34 Raychart 320 Chartplotter
Figure 3-41: Save Route Soft Keys
i. To save the route in the database, press YES.
ii. To clear the route, without saving it in the route database, press
NO.
5. Continue as described previously in Saving the Current Route on
page 3-30. The current route is cleared from the screen and the default
soft keys are displayed. You can now use the
ROUTE soft keys to make
a route, or to show another route from the database.
Retrieve a Route from the Database
A route can be selected from the Route List for use as the current route.
The Route List is accessed from the second set of
ROUTE soft keys.
➤ To select a route as the current route:
1. From chartplotter mode, press the
ROUTE soft key, followed by
MORE, then ROUTE LIST. The Route List is displayed with the selected
route highlighted, see Figure 3-36.
Note: In any mode other than chartplotter mode, the
ROUTE LIST soft key
is available without pressing the
MORE... soft key.
2. Use the trackpad up/down to select the required route then press the
SHOW ROUTE soft key. The Route List is removed and the selected
route is shown on screen as the current route. If the current route has
not been saved, you are prompted to do so.
Using the Route List to Erase or Name a Route
The Route List can be used to delete a route or re-name a route.
➤ To delete or re-name a route in the Route List:
1. Press the
ROUTE soft key, followed by MORE, then press ROUTE LIST.
The Route List is displayed. The selected route is highlighted, see
Figure 3-36.
Note: In any mode other than chartplotter mode, the
ROUTE LIST soft key
is available without pressing the
MORE... soft key.
2. Use the trackpad up/down to select the required route and press the
appropriate soft key -
ERASE ROUTE or NAME ROUTE.
3. If you
ERASE a route you are prompted to confirm.
YES NO
SAVE ROUTE?
D4915-1
81167_3.BOOK Page 34 Wednesday, November 21, 2001 2:12 PM