Filter
Top Products
90
Language Selection
The language displayed can be set (see “Setup 3: Installing the Program” on page 22).
Once you change the language, installation of the program starts.
Caution
Once the installation of the program starts, do not stop the engine of your
vehicle until the installation is completed.
➲ If you change the language used, the set password is cleared. If desired, set the password
again (see “Registering a Password” on page 71).
Return Home
Registering and changing your home location (see “Registering Your Home and Your Favourite
Location” on page 68).
Go to ...
Registering and changing your favourite location (see “Registering Your Home and Your
Favourite Location” on page 68).
Modify Current Location
Move the joystick to up/down or left/right to adjust the current location of your vehicle and
direction displayed on a map.
Adjust Display Position
The display position of the screen of your Navigation System is adjusted. To adjust the
screen, move the joystick up/down and left/right. Adjust to the optimal position, making sure
that all four corners of the display are visible.
■RDS - TMC menu
Real Time Reroute Alert
This setting controls whether, when a traffic jam on the set route is received, to display a mes-
sage. On this message, you can select whether to calculate a route by taking traffic jam into
account.
Avoid Traffic Route
This setting controls whether, when a traffic jam occurs on the route, to calculate a route by
taking traffic jam into account.
On* : Confirming message is displayed.
Off : Confirming message is not displayed. Route calculation is not carried out, when a
traffic jam occurs on the route.
On* : Route calculation is carried out by taking a traffic jam into account.
Off : Route calculation is carried out without taking a traffic jam into account.