Filter
Top Products
86
Items Users can Change
The Settings menu contains the Route Guidance, Map Display, Hardware, Others, RDS-TMC,
and PC Card menus. If you select a menu name in the Settings menu, an equivalent menu
appears. In the menu screen, the contents of the current setting is shown on the right-hand side
of each item.
This section describes the details of the setting for each menu. Settings marked with an asterisk
(*) show that they are default or ‘factory’ settings.
➲ For PC card menu, see “Using a PC Card” on page 78.
■Route Guidance menu
Auto Reroute
This setting controls whether, when you stray from the guided route, the system automati-
cally recalculates the route to your destination.
Areas to Avoid
Setting or change of Areas to Avoid is performed (see “Setting Areas to Avoid” on page 72).
Route No.
This setting controls whether, during a route calculation, the system calculates one route only,
or whether it calculates six route options, one of which you select.
Fastest/Shortest
This setting controls conditions for calculating a route.
Avoid Motorway
This setting controls conditions for calculating a route.
➲ Even when the setting of “Avoid Motorway” is turned “On”, a route using the motorway may
be set if your destination is far away.
Avoid Ferry
This setting controls conditions for calculating a route.
On* : Auto Reroute function is turned on.
Off : Auto Reroute function is turned off.
1*: Route options are not shown, and only one route judged as being optimum by your
Navigation System is calculated.
6: Six route options are calculated.
Shortest : Calculate a route with the shortest distance to your destination as a priority.
Fastest* : Calculate a route with the shortest travel time to your destination as a priority.
On : Calculate a route that avoids motorways.
Off* : Calculate a route that may include motorways.
On : Calculate a route that avoids ferries.
Off* : Calculate a route that may include ferries.