Pioneer AVIC-8DVD GPS Receiver User Manual


 
78
Using a PC Card
You can store data in the Address Book in a PC card, which can also be read by this unit. It is
very useful when you want to share the data in the Address Book with your friends or to store
the data for backup.
Before using a brand new card, you must initialise it, as described next.
Initialising a PC card
1 Select Settings in the Main menu, then select PC Card and Initialise PC card.
Click the OK button.
A message asking you to confirm the initialisation of the PC card appears.
2 Select Yes and click the OK button.
Once initialisation is complete, a message to select the operation of the PC card automat-
ically appears. (If you want to cancel the initialisation, select “No”.)
Do not stop the engine until initialisation of the PC card is complete.
Storing the data of registered locations in the PC card
You can select any item registered in the Address Book and store the data in the PC card. Data
can be stored in the corresponding group. A new group can be created. (However, if nothing
is registered in Registered Locations in Address Book, you cannot use this function.)
This section describes a method of creating a new group and storing the data of the registered
location into the group.
The volume of data you can register depends on the capacity of the PC card.
1 Select Settings in the Main menu, then select PC Card and Store on PC card.
Click the OK button.
The list of locations registered in the Address Book appears.
2 Select the desired item for storage and click the OK button.
The selected item is ticked. To register other locations, repeat this step.
Alternative option:
Select All : All the locations are selected at once.
Free space in the PC card
Number of groups you can store