Pioneer AVIC-8DVD GPS Receiver User Manual


 
51
Chapter 3
Setting a Route to Your Destination
Finding Your Destination by Specifying the Postal Code
If you know the postal code of your destination, you can use it to find your destination.
1 Select New Destination from the Main menu, and then select Postal code Search.
Click the OK button.
If necessary, change the country setting. For the details, see Selecting the country
where you want to search on page 42.
2 Enter the postal code and select OK. Then click the OK button.
The list of the postal codes perfectly matching the numbers entered appears.
If the postal code you entered is not found, a message appears. Select “Yes” and click
the OK button, and re-enter the postal code. (If you select “No”, the search is can-
celled.)
3 Select the postal code and click the OK button.
The list of the cities around the area corresponding to the selected postal code appears.
If you move the joystick to the left, the map of the area corresponding to the selected
postal code appears.
4 Search your destination following the instructions from the Step 3 of Searching
Your Destination by Address onwards.
If a city, which is set as your destination, is located in areas outside the map displayed
when selecting a postal code, or so many cities are located near that location, even if
the city in the area of the selected postal code, it may not be shown in a list.
In the disc, not all the postal codes are recorded. Thus, you may not be able to search
the location corresponding to the postal code you enter. In such a case, try the follow-
ing:
In the case of the postal code which contains the letters such as “1322HP”, enter
only the numbers (in case of Holland).
For the postal code such as “SL2 4QP”,enter without last letters such as “SL 4” (in
case of England).