Filter
Top Products
F8QT ENGINE -
Specifications
11A-1-3
Item LimitStandard
Intermediate shaft
Inner bearing mm 39.5 -
Outer bearing mm 40.5 -
End play mm 0.07 - 0.15 -
Crankshaft
End play mm 0.07 - 0.23 -
Thrust washer thickness mm 2.30 - 2.50 -
Radial clearance (main bearings) mm 0.04 - 0.07 -
Main bearing journals
Ovality mm - 0.0025
Taper mm - 0.005
Diameter mm Standard (blue) 54.785 - 54.805 -
Standard (red) 54.795 - 54.805 -
Undersize 1 54.550 - 54.560 -
Big-end bearing journals
Ovality mm - 0.0025
Taper mm - 0.005
Diameter mm Standard 48.00 - 48.02 -
Undersize 1 47.75 - 47.77 -
Bearing recess width mm 20.25 - 20.95 -
Relative difference mm - 0.02
Connecting rod (big-end) bearings
Axial clearance mm 0.22 - 0.40 -
Radial clearance mm 0.031 - 0.075 -
Connecting rods
Length mm 144 ± 0.02 -
Small end inside diameter mm 26.013 - 26.025 -
Squareness, top/bottom mm - 0.04
Straightness mm - 0.1
PWEE9602
E
July 1996Mitsubishi Motors Corporation