Filter
Top Products
F8QT ENGINE -
Oil Pan, Oil Pump and Oil Jets
11A-16-2
INSTALLATION SERVICE POINTS
"
A
A
OIL PAN INSTALLATION
(1) When applying sealant, make sure that the cartridge
nozzle opening is not larger than 4 mm.
(2) Apply an even, uninterrupted bead of sealant
A
to the
entire circumference of the oil pa n flange
3
as shown
in the illustration.
(3) Install the oil pan
3
.
Caution
D
Make sure that the surface to which the sealant
A is applied is free of dirt and other impurities.
D
When installing the oil pan, make sure that no
sealant A is applied to other parts or in the oil
passages.
INSPECTION
OIL PUMP
(1) Check th e flatness of the cover with a straight-edge.
Surface-sand th e cover if necessary.
(2) Clearance between the gears and the pump body
Fit new gears if the clearance is greater than the specified
limit value.
If the clearance is still greater than the specified limit
value, fit a new oil pump.
PWEE9602
E
July 1996Mitsubishi Motors Corporation
REN0088
A
REN0089
REN0090