Filter
Top Products
F8QT ENGINE -
Fuel Injection Pump
11A-19-2
REMOVAL SERVICE POINTS
A
A
"
SPROCKET REMOVAL
(1) Locate the sprocket stopper MB996043 between the
pump bracket a n d the sprocket. Fasten the tool with the
bolts supplied with the set.
(2) Remove the screwed sleeve and nut assembly with
hexagon socket spanner MB996036 (release by turning
clockwise).
(3) Remove the nut.
(4) Pull the sprocket off the shaft with a gear puller. Remove
the locking tool.
A
B
"
FUEL INJECTION PUMP REMOVAL
(1) Remove the injection pipes.
(2) Remove t he three bolts
15
.
(3) Remove the two bolts
16
.
INSTALLATION SERVICE POINTS
"
A
A
SPROCKET INSTALLATION
(1) Locate the sprocket with the key on the fuel injection
pump shaft. Align the sprocket with the mark opposite
the pump bracket.
(2) Locate the sprocket stopper MB996043 between the
pump bracket a n d the sprocket. Fasten the tool with the
bolt supplied with the set.
(3) Fit and tighten the nut to the specified torque.
(4) Locate the flange with the screwed sleeve and nut
assembly and tighten to the specified torque with hexagon
socket spanner MB996036.
PWEE9602
E
July 1996Mitsubishi Motors Corporation
REN0102
MB996043
MB996036
REN0103
REN0104
MB996043
MB996036