Filter
Top Products
F8QT ENGINE -
Crankshaft and Cylinder Block
11A-23-4
"
D
A
CRANKSHAFT FRONT OIL SEAL INSTALLATION
(1) Coat the lip of the oil seal with a thin layer of engine
oil.
(2) Locate the oil seal installer guide MB996040 over the
crankshaft.
(3) Locate the oil seal over the oil seal installer guide.
(4) Fit the oil seal with oil seal installer MB996040.
"
E
A
CRANKSHAFT REAR OIL SEAL INSTALLATION
(1) Coat the lip of the oil seal with a thin layer of engine
oil.
(2) Locate the installer oil seal guide MB996038 over the
crankshaft.
(3) Locate the oil seal over the oil seal installer guide.
(4) Fit the oil seal with oil seal installer MB996038.
PWEE9602
E
July 1996Mitsubishi Motors Corporation
REN0135
MB996040
REN0136
MB996038