Filter
Top Products
List of states with predictive speller
:
Top list entry based on the input data up
to that point
;
Characters entered by the user
=
Characters automatically added by the
system
?
Clear last character entry
A
Currently selectable characters
B
Currently non-selectable characters
C
Predictive speller
D
List of states
E
Currently selected character
i
In the predictive speller C, you can only
select currently selectable characters.
Which characters are included depends on
the sequence in which you have entered
your destination and the digital map.
While the numbers are being selected as
described below, the top list entry : always
shows the state which best matches to the
input data as it has been entered up to that
point.
At the same time, COMAND automatically
adds matching characters = to the
characters ; already entered by the user.
X
Selecting characters: Slide XVY or
rotate cVd.
X
Confirming character selection:
Press W.
X
Deleting individual characters: Select
F in the bottom line and press W.
X
Deleting an entire entry: Select F in the
bottom line and press W and hold until the
entire entry is deleted.
X
Canceling an entry: Select % in the
bottom line and press W.
or
X
Press back button % in the center
console (Y page 75).
As soon as COMAND can clearly attribute the
characters entered to a state, predictive
speller C disappears automatically. You see
the list of states without the predictive
speller. Here you can confirm the current
entry or make another selection.
During character entry, you can also manually
switch to the list of states without the
predictive speller at any time.
X
Switching manually to list of states
without predictive speller: Slide ZV.
or
X
Select ¬ in the second line from the
bottom and press W.
List of states without predictive speller
COMAND navigation system (entering a destination)
95
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 95
Z