Filter
Top Products
During a driving maneuver additional lanes
may become available on the road or
highway.
:
Lane that opened up during the driving
maneuver
;
Through lane
Navigation status displays in the
instrument cluster
While route guidance is active, the following
messages may be shown in the multifunction
display:
R
O
You have reached your destination.
R
Area of dest. reached
You have arrived in the area of your
destination. The message appears, for
example, for relatively large POIs.
R
New route...
COMAND calculates a new route, e.g.
because you have deviated from the
calculated route or due to a detour report.
Afterward, COMAND continues route
guidance.
R
Calculating route
COMAND is calculating a route. Afterward,
COMAND starts route guidance.
R
Off map
The vehicle’s location is outside of the
digital map’s range. The vehicle is in an off-
map position (Y page 121).
R
Off mapped road
The vehicle is either on a road that has not
been digitized (Y page 121) or on the side
of a road, e.g. in a parking space.
R
No route
COMAND cannot calculate a route to the
selected destination.
R
Direction of Dest.
The vehicle has gone off the map during
route guidance (Y page 121).
Audio menu
The functions in the Audio menu operate the
audio equipment which you have currently
switched on.
The following functions are available:
R
Selecting radio station (Y page 207)
R
Operating audio devices/audio media
(Y page 208)
R
Operating video DVD (Y page 208)
If no audio equipment is currently switched
on, the message Audio OFF appears in the
multifunction display.
X
To adjust the volume: Press button
W or X on the multifunction steering
wheel.
Selecting radio station
i
The SIRIUS XM Satellite Radio is treated
as a radio application.
Additional optional satellite radio
equipment and a subscription to a satellite
radio service provider are required for
satellite radio operation. Contact an
authorized Mercedes-Benz Center for
details and availability for your vehicle.
For more information on satellite radio
operation, see “Satellite radio”
(Y page 157).
X
Switch on the COMAND system and select
AM/FM radio (Y page 152) or satellite
radio (Y page 157).
X
Press button = or ; to select the
Audio menu.
The currently tuned station appears in the
multifunction display.
Instrument cluster control system
207
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 207
Z