Filter
Top Products
X
Select climate control settings Q Central
climate control menu.
X
Selecting Mono: Slide ZVÆ or rotate
cVd.
X
Confirming selection: Press W.
A checkmark appears when the function
has been selected.
X
Exiting menu: Press back button % in
the center console (Y page 69) or slide
XVY.
The Mono function is automatically switched
off when you:
R
change a climate control setting for the
front passenger side using COMAND
R
operate a button from the climate control
for the front passenger side
R
operate one of the buttons for the rear
climate control system
Adjusting footwell temperature
i
In automatic mode, this setting optimizes
the footwell temperature when outside
temperatures are low.
The Footwell Temperature function is used
to adjust the temperature difference between
the footwell and the rest of the passenger
compartment.
The higher the selected value, the higher the
temperature in the footwell will be.
X
Select climate control settings Q Central
climate control menu.
X
Selecting Footwell Temperature: Slide
ZVÆ or rotate cVd and then press W.
X
Changing temperature difference: Slide
ZVÆ or rotate cVd.
X
Exiting menu: Press W, back button
% in the center console (Y page 69) or
slide XVY.
The setting is saved.
Adjusting air flow from air vents
i
In automatic mode, this setting optimizes
the air flow when outside temperatures are
high.
The Airflow setting defines air distribution
and air volume in automatic mode:
R
Focused (default setting, increased air
flow)
R
Medium (reduced air flow)
R
Diffuse (minimal air flow)
i
When the interior ambient temperature of
the vehicle is very hot and the climate
control is cooling the interior, the setting
for air flow is temporarily overridden.
X
Select climate control settings Q Central
climate control menu Q Airflow.
A selection list appears.
The current setting is indicated by a
dot #.
COMAND automatic climate control
197
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 197
Z