Filter
Top Products
X
Select channel by rotating cVd or sliding
ZVÆ and press W.
Saving stations
i
Twenty stations can be saved in each
wave band except for Weather Band.
You have the following options:
R
Saving stations manually
R
Saving stations using the autostore
function
Saving stations manually
Option 1
X
Select Audio Q FM/AM Radio Q FM or
AM.
X
Select Radio Q Save Station.
Option 2
X
Press W when the main area is selected.
Option 3
X
Select Audio Q FM/AM Radio Q FM or
AM.
X
Select Presets.
All three of these will call up a station preset
screen. The dot # in front of a preset
position indicates that the currently selected
station is saved there.
X
Selecting a preset position: Slide ZVÆ or
rotate cVd.
Saving a station to a selected preset
position
If you have called up the station preset screen
using option 1:
X
Press W briefly.
In options 2 and 3:
X
Press and hold W until you hear a signal.
The station is saved.
Saving using the autostore function
i
This function is not available for Weather
Band. The autostore function saves
receivable stations as presets in order of
their reception quality. All stations saved
manually in the preset memory will be lost
if COMAND finds 20 stations. If COMAND
finds less than 20 stations, for example 9,
then the stations saved in preset
positions 1 – 9 will be overwritten.
Option 1
X
Press W when the main area is selected.
X
Select Autostore.
Option 2
X
Select Audio Q FM/AM Radio Q FM or
AM.
X
Select Presets Q Autostore.
Option 3
X
Select Audio Q FM/AM Radio Q
Radio Q Save Station Q Autostore.
Station name display
i
In the FM wave band, COMAND can show
the name of the station currently tuned in.
Station name display : can only be seen
when it is switched on and if the station
transmits a name.
156
COMAND FM/AM radio
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 156