Filter
Top Products
Change the settings in the following order:
1. Time zone
2.
Daylight savings time/standard time
3. Time lag (only necessary in exceptional
cases)
Setting the time zone and switching
between daylight savings time and
standard time
X
Setting time zone: Select Vehicle Q
System Q Time Q Time Zone.
The
country
list appears. The dot # in front
of a list entry indicates the current setting.
X
Select the country in which you are.
A time zone list may also be displayed,
depending on the selected country.
X
Select the desired time zone.
Subsequent operation depends on
R
whether your navigation system has GPS
reception
R
which country you have set previously
You may either switch between Daylight
Savings Time (Summer) and Standard
Time.
X
Select Daylight Savings Time
(Summer) or Standard Time.
The dot # in front of a list entry indicates
the current setting.
X
Saving setting and exit the menu: Slide
XVY.
Adjusting time lags
i
In some exceptional cases, e.g. where
time zones border, the displayed time and
the local time may show a time lag.
This time
lag can be adjusted in steps of 30
minutes.
X
Select Vehicle Q System Q Time Q
Time.
X
Selecting hour or minutes: Slide XVY.
X
Setting value: Rotate cVd or slide ZVÆ.
X
Saving setting: Press W.
Setting the date
X
Select Vehicle Q System Q Time Q
Date.
X
Selecting month, day, or year: Slide
XVY.
X
Setting value: Rotate cVd or slide ZVÆ.
X
Saving setting: Press W.
i
Setting
the
date is only necessary or even
possible if the COMAND system does not
receive a GPS signal.
Setting the time/date format
X
Select Vehicle Q System Q Time Q
Format.
The format list appears. The dots # in
front
of
the list entries indicate the current
setting.
X
Changing format setting: Select desired
format.
X
Saving setting and exit the menu: Slide
XVY.
Voice Control System settings
Switching help window on or off
X
Select Vehicle Q System Q Voice
Control.
X
Select Help Window.
A checkmark appears when the help
window is switched on.
Individualization
Using individualization, you can fine-tune the
Voice Control System to your own voice and
thus
improve
voice recognition. The ability of
the system to recognize the commands of
other users does not deteriorate as a result.
80
COMAND system settings
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 80