Filter
Top Products
COMAND system settings
System settings submenu overview
i
The components and operating principles
of COMAND can be found on (Y page 68).
System settings can be made in the following
submenus:
R
Display Q Day Mode, Night Mode,
Automatic
R
Time Q Time, Date, Format, Time Zone
R
Text Reader Q Speed Q Fast,
Medium or Slow:
Adjusts the reading speed of the Voice
Control System.
R
Voice Control Q Help Window, Start
New Individualization, Delete
Individualization
R
Language: Selecting system language
R
Favorites Button *: Assigning the
favorite button
R
Bluetooth Q Search for Bluetooth
Devices, Bluetooth activated. For
information on the Bluetooth
®
interface
see (Y page 138).
R
Upload/Download Data Q Copy Data
to Storage Medium, Import Data from
Storage Medium (Y page 82)
R
Reset: Resetting the COMAND system to
factory settings
Display settings
Switching the display on or off
X
Switching off: Select Vehicle Q
Display OFF.
X
Switching back on: Rotate cVd or slide
ZVÆ, XVY or press W.
or
X
Press button u.
Setting the display design
X
Select Vehicle Q System Q Display.
X
Select Day Mode, Night Mode or
Automatic.
i
In the Automatic setting, COMAND sets
the display design automatically. The
setting depends on the information
retrieved from the vehicle's light sensor.
Time settings
The time of day is set automatically according
to the GPS signal and the selected time zone.
All time information always applies to the
local time at the current vehicle position.
Time information changes when entering a
different time zone.
i The correct time zone, daylight savings
time/standard time and the time itself
must be set for the following navigation
system functions to operate correctly:
R
Route guidance on routes with time-
dependent traffic guidance
R
Calculation of estimated arrival time
The settings are adopted for the analog
clock in the dashboard.
COMAND system settings
79
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 79
Z