Filter
Top Products
Ending a call or rejecting an incoming
call
X
Press button ~.
Dialing a number from the phone book
When your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
X
Press button = or ; to select the
Telephone menu.
X
Press button : or 9 or a to
switch to the phone book.
The stored names are displayed in
ascending alphabetical order.
X
Press button : or 9 to select the
desired entry.
If you press and hold button : or
9
the
system scrolls rapidly through the
list of names (quick search). After holding
button : or 9 for a short while the
scrolling speed increases. Release the
button to stop the quick search. The search
stops automatically at the end of the list.
X
If the Symbol G appears
on the right-hand
side of the name several entries are
present for the same name: Press button
6 or a and select the desired entry.
X
Press button 6 or a.
The control system dials the selected
phone number.
If the connection is successful and this
feature is supported by your network
provider, the
name of the party (if stored in
your phone book) you are calling will
appear in the multifunction display.
The control system stores the dialed
number in the redial memory.
or
X
Press button ~ if you do not want to
make the call.
Redialing
The control system stores the most recently
dialed phone numbers. This eliminates the
need to search through your entire phone
book.
X
Press button = or ; to select the
Telephone menu.
X
Press button 6.
X
Press button : or 9 to select the
desired number or name.
X
Press button 6 or a.
The control system dials the selected
phone number.
Assistance menu
In the DriveAssist menu, you can change
the settings of your driving systems.
The following functions are available:
R
Displaying distance graphic, DISTRONIC
PLUS (Y page 308)
R
Switching ESC on or off (
Y page 212)
R
Activating/deactivating PRE-SAFE
®
Brake
(vehicles with DISTRONIC PLUS only)
(Y page 213)
R
Switching Blind Spot Assist on or off
(Y page 213)
Switching ESC on or off
G
Warning!
Never switch off the ESC when you see the
ESC warning lamp ÷ flashing in the
instrument cluster. In this case proceed as
follows:
R
When driving off, apply as little throttle as
possible.
R
While driving, ease up on the accelerator
pedal.
R
Adapt your speed and driving style to the
prevailing road conditions.
212
Instrument cluster control system
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 212