Filter
Top Products
The currently selected main function is
highlighted.
Once you have selected a main function, main
area = is active.
i
The layout of the menus may vary
depending on your vehicle’s equipment.
This manual shows the menus for a fully
equipped vehicle.
Adjusting COMAND display illumination
X
Increasing the illumination: Turn
knob : clockwise.
X
Dimming the illumination: Turn knob :
counterclockwise.
Swiveling COMAND display
With button : or ; you can swivel the
COMAND display to the left or right.
Instrument cluster multifunction
display
This section describes features and controls
via the COMAND controller, display and
shortcut buttons only.
Related COMAND features are described in
the “Instrument cluster control system”
section (Y page 201). It contains function
descriptions and operation of the instrument
cluster multifunction display and the
multifunction steering wheel buttons.
Telephone keypad
X
Flip up cover ;.
With telephone keypad : you can
R
enter and clear numbers and special
characters
R
reject, answer, connect and end calls
(Y page 135)
R
select preset radio stations and enter the
frequency manually (Y page 155)
R
select preset satellite radio stations and
enter the channel number (Y page 161)
R
select a storage medium from the DVD
changer (Y page 170)
R
select a track directly in CD mode, DVD
audio mode or MP3 mode (Y page 170), or
from a device connected to the media
interface (Y page 187)
70
COMAND introduction
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 70