Filter
Top Products
X
Take the collapsible wheel chock from the
vehicle tool kit (Y page 412).
X
Setting up: Tilt both plates upward :.
X
Fold the lower plate outward ;.
X
Guide the tabs of the lower plate all the way
into the openings of base plate =.
For information on where to place wheel
chocks when changing a wheel, see “Lifting
the vehicle” (Y page 466).
Jack
G
Warning!
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes. If
you use the jack for any other purpose, you or
others could be injured, as the jack is
designed only for the purpose of changing a
wheel.
When using the jack, observe the safety notes
in the “Mounting the spare wheel” section and
the notes on the jack.
X
Take the jack from the vehicle tool kit
(Y page 412).
Storage position
X
Turn the crank handle in the direction of
arrow as far as it will go.
Operational position
X
Turn the crank handle clockwise.
Before placing the jack back into the vehicle
tool kit:
X
Fully collapse the jack.
X
Fold in the crank handle (storage position).
Spare wheel
G
Observe Safety notes, see page 465.
The spare wheel is located in the space
underneath the trunk floor.
X
Removing: Open the trunk (Y page 257).
X
Lift the trunk floor using the floor handle.
X
Engage the trunk floor handle on the upper
trunk lip.
!
To prevent damage, always disengage the
floor handle from the upper trunk lip and
Where will I find ...?
413
Practical hints
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 413
Z