Filter
Top Products
To support the spine, you can adjust the
curvature of the front seat backrests.
X
Press button T.
The main area of the COMAND display is
active. A scale appears.
:
Scale
;
Cursor
=
Current seat
?
Current setting
X
Select seat (Y page 198).
X
Adjusting lumbar support: Slide XVY or
rotate cVd until desired setting is
reached.
X
Confirming selection: Press W.
X
Switching to the bottom menu line: Slide
XVY.
X
Confirming selection: Press W.
i
After you have pressed button T, the
seat last adjusted is active.
Drive-dynamic multicontour seats
i
If PRE-SAFE
®
has been activated, the air
pressure in the air chambers (sides of seat
cushion and seat backrest) of the drive-
dynamic multicontour seats is increased.
Drive-dynamic multicontour seats allow
several individual support adjustments and
can automatically adjust lateral support to
your driving style (Y page 200).
i
Whether adjustments are being made
manually or automatically, noises may
result from pumping air into or releasing air
out of the air chambers.
Multicontour adjustments
To support the spine, you can individually
adjust the seat backrest contour of the front
seats by regulating the air pressure in the air
chambers.
The settings are made on the COMAND
display.
You can adjust the following air chambers:
R
sides of seat cushion
R
sides of seat backrest
R
seat backrest curvature in lumbar area
R
seat backrest curvature in shoulder area
Adjusting sides of seat cushion
This function is used to adjust the air
chambers in the sides of the seat cushion.
X
Select seat (Y page 198).
X
Selecting Seat Sides: Slide XVY or
rotate cVd.
X
Confirming selection: Press W.
A scale appears.
:
Scale
;
Cursor
=
Current setting
COMAND seats
199
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 199
Z