Filter
Top Products
Individualization consists of two parts. You
train the system to recognize digits in the first
part and specific commands in the second
part.
Starting new individualization
i
The vehicle must be stationary to start
individualization. After starting the session,
acoustic instructions will guide you through
the individualization.
X
Select Vehicle Q System Q Voice
Control Q Start New
Individualization.
A prompt appears asking whether you
would like further information.
X
Select Yes or No.
If you select No, the first part of
individualization begins.
If you select Yes, an information display will
be shown with audio instruction.
X
Closing display: Select OK.
The first part of individualization begins.
At the end of the first part, you will see a
prompt asking whether you want to begin
the second part.
X
Select Yes or No.
If you select No, individualization will be
canceled. The data from the first part is
saved automatically.
If you select Yes, the second part begins.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
saved automatically.
Canceling during the first or second part
of individualization
X
Select Cancel.
A prompt appears asking whether you
really do want to cancel.
X
Select Yes or No.
If you select Yes, individualization will be
canceled. The data from the part at which
you exited is not saved.
If you select No, the part at which you
stopped begins again.
Deleting existing individualization data
X
Select Vehicle Q System Q Voice
Control Q Delete
Individualization.
A prompt appears asking whether you
really do want to delete.
X
Select Yes or No.
The individualization data will either be
deleted or not, depending on your
selection.
Setting the system language
X
Select Vehicle Q System Q
Language.
The language list appears. A dot #
indicates the current setting.
X
Changing setting: Select the desired
language.
The language is set.
i
For some system languages, the
navigation announcements are made in
English (Y page 122).
Assigning the favorite button
You can assign the following predefined
functions to favorite button g:
R
Driver's Seat Massage (Y page 199)
COMAND system settings
81
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 81
Z