Filter
Top Products
This does not apply when entering voice
names or during the individualization
process.
or
X
Press any COMAND button.
Setting volume level
X
Activate the Voice Control System.
X
Speak a command, for example “Help”.
X
Press button W or X. The volume is
increased or decreased during voice
output.
or
X
Set volume for voice output using the
COMAND volume thumbwheel on the lower
part of the front center console
(Y page 76).
i
You can also set the text reader speed
(Y page 79).
Displays
COMAND Display
In addition to the acoustic help function, a
visual help function (Y page 80) is available
on COMAND display :.
Upon activating the Voice Control System,
the most important available commands for
the currently active mode appear on
COMAND display :.
When the Voice Control System requires
additional information from the user, a
selection list is shown on COMAND
display : in the address book and navigation
system.
Multifunction display
For example, telephone numbers are shown
in the multifunction display : while dialing
when the main Telephone menu is selected
in the instrument cluster control system.
Symbols
The following symbols are found in the Voice
Control System pages:
\
This symbol stands for commands and
voice names you are speaking.
^
This symbol stands for voice output by
the Voice Control System.
_
This symbol indicates that information
is available on the COMAND display.
Voice Control System navigation
Important notes
Safety notes for using the Voice Control
System
G
Observe Safety notes, see page 217.
Safety notes for using the navigation
system
G
Observe Safety notes, see page 83.
Voice Control System navigation
219
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 219
Z