Filter
Top Products
COMAND automatic climate control
Introduction
i
The components and operating principles
of COMAND can be found on (Y page 68).
G
Warning!
Follow the recommended settings for heating
and cooling given on the following pages and
pages in the “Controls in detail” chapter.
Otherwise the windows could fog up,
impairing visibility and endangering you and
others.
You can operate the climate control via
COMAND or via the buttons on the climate
control panel (Y page 338).
Some of the special climate control functions
can only be operated via COMAND.
The following climate control functions can
be operated via COMAND:
R
Temperature (Y page 194)
R
Air distribution (Y page 195)
R
Air volume (Y page 195)
R
Switching off cooling (Æ)
(Y page 196)
R
Central climate control (Mono)
(Y page 196)
R
Footwell temperature (Y page 197)
R
Air flow from air vents (Y page 197)
The climate control menu is called up via the
climate control settings.
Climate control settings with functions (submenus)
:
Temperature, driver’s side
;
Air distribution, driver’s side
=
Air volume, driver’s side
?
Central menu, climate control
A
Air volume, passenger side
B
Air distribution, passenger side
C
Temperature, passenger side
Setting temperature
G
Observe Safety notes, see page 339.
Use the temperature controls w
(Y page 338) in the center console or
COMAND climate control settings to
separately adjust the air temperature on each
side of the passenger compartment.
X
Select climate control settings Q
Temperature, left or right and then press
W.
194
COMAND automatic climate control
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 194