Filter
Top Products
Delayed Shut-off: Slide XVY or rotate
cVd and press W.
A menu appears.
The dot # indicates the currently selected
setting.
X
Selecting setting: Slide ZVÆ or rotate
cVd and press W.
The dot # indicates the currently selected
setting.
i
The exterior lamp switch must be in
position c (Y page 275) before turning
off the engine. Otherwise the exterior
lighting will not come on when leaving the
vehicle.
Setting interior ambient lighting
i
The components and operating principles
of COMAND can be found on (Y page 68).
You can select the following settings:
R
SOLAR (amber interior lighting)
R
NEUTRAL (white interior lighting)
R
POLAR (blue interior lighting)
R
Brightness of the interior lighting ranging
from 0 (off) to 5 (bright)
X
Select Vehicle.
The main area is active.
X
Selecting Ambient Lighting: Slide
XVY or rotate cVd and press W.
A menu appears.
The dot # indicates the currently selected
setting.
X
Selecting setting: Slide ZVÆ or rotate
cVd and press W.
The dot # indicates the currently selected
setting.
Setting automatic mirror folding
i
The components and operating principles
of COMAND can be found on (Y page 68).
In the Automatic Mirror Folding menu,
you can determine whether the exterior rear
view mirrors fold in when you lock the vehicle.
X
Select Vehicle.
The main area is active.
X
Selecting Automatic Mirror Folding:
Slide XVY or rotate cVd.
X
Switching automatic fold-in function
on/off: Press W.
Locator lighting on/off
i
The components and operating principles
of COMAND can be found on (Y page 68).
With the locator lighting feature activated and
the exterior lamp switch in position c
(Y page 275), the following lamps will switch
on during darkness when the vehicle is
unlocked from the outside:
192
COMAND vehicle menu
Control systems
216_AKB; 3; 90, en-US
d2ureepe, Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 192