Filter
Top Products
31
NOTE:
One of the data display options for the Satellite Status page is "Po-
sition Error" (horizontal position error), which can appear in one of
the page's data boxes. When Position Error is on, it will show you
the expected error from a benchmark location. In other words, if the
Position Error box shows 50 feet, then the position shown by the
unit is estimated to be within 50 feet of the actual location. This
gives you an indicator of the quality of the satellite fix the unit has.
The smaller the position error number, the more accurate the satel-
lites fix. If the position error flashes dashes, then the unit hasn't
locked onto any satellites, and the number shown isn't valid.
The Satellite Status Page has its own menu, which is used for setting
various options. To access the Satellite Status Page Menu, from the
Status Page, press
MENU.
Navigation Page
This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. To get to the Navi-
gation Page: Press
PAGES|→ or ← to NAVIGATION|EXIT. The navigation
screen looks like the one below when you're not navigating to a way-
point or following a route or trail. Your position is shown by an arrow
in the center of the screen. Your trail history, or path you've just taken,
is depicted by the line extending from the arrow. The arrow pointing
down at the top of the compass rose indicates the current track (direction
of travel) you are taking.
Navigation Page, recording a trail, traveling southwest. Page looks
like this when the unit is not navigating to a waypoint, following
a route or backtracking a trail.
Compass
rose
Navigation
information
displays in
customizable
data boxes.
Present
position
arrow.
Trail line
Track or compass heading indicator showing direction of travel