Lowrance electronic 5200C GPS Receiver User Manual


 
105
Section 6: Searching
NOTE:
The Search function depends on the type of map data loaded in
your unit. GlobalMap HD models are fully "searchable" out of the
box because they contain a hard drive loaded with complete map-
ping information. These maps include all the data contained in our
MapCreate custom maps, Fishing Hot Spots lake maps and Nau-
ticPath coastal charts. For all other units, the background map
loaded in your unit's permanent memory lets you search for some
land features, including cities and lakes. For a full set of searchable
land features, including landmarks, streets, addresses, highway ex-
its and Points of Interest, you must load your own high-detail cus-
tom map produced with our MapCreate software. Or, you can use
one of our plug and play map options such as FreedomMaps, Fish-
ing Hot Spots or NauticPath. For a complete description of what
detail is found in the background map and custom MapCreate
maps, see page 35.
This unit's varied search functions all begin with either the Find Way-
point menu or the Map Page menu. Press
WPT and the Find Waypoint
menu appears for waypoints and Points of Interest (POI). From the
Map Page, press
MENU and the Map Page menu appears for streets,
addresses and highway exits.
Find Waypoint menu, left; Map Page menu, right.
NOTE:
You can search for items once the unit has acquired a position, or while
using the unit in the "indoor" simulator mode. Distance and bearing to
the selected item will be calculated from the unit's current position, or
the last known position if operating indoors (without a position deter-