Filter
Top Products
37
6. The GlobalMap 3200's map appears, with the cross-hair cursor high-
lighting the restaurant's POI symbol. A pop-up name box identifies the
POI. A data box at the bottom of the screen continues to display the
location's latitude and longitude, distance and bearing.
Map screen showing Finding Waypoint,
the result of a restaurant search.
7. To clear the search and return to the last page displayed, press
EXIT
|
EXIT
|
EXIT
|
EXIT
. (Before you completely exited out of the Search
menus, you could have gone looking for another place.)
NOTE:
Search works from mapping and POI data loaded in the unit. If you
do not have a high-detailed custom map (containing POI data) for
the area you are searching loaded on the MMC, you may not find
anything.
Set a Waypoint
A waypoint is simply an electronic "address," based on the latitude and
longitude of a position on the earth. A waypoint represents a location,
spot, or destination that can be stored in memory, then be recalled and
used later on for navigation purposes.
You can create a waypoint at the cursor position on the map, or at your
current position while you are navigating. You can create a waypoint at
any location by manually entering the position's latitude and longitude.
You can copy waypoints from your GlobalMap 3200 to your personal
computer with MapCreate software. When you want to repeat a trip,
these archived waypoints can be reloaded into your GPS unit.