Filter
Top Products
90
The last field in this menu is
C
ONFIG
DST
. This feature allows your
GlobalMap 3200 to automatically adjust with the time change caused
by Daylight Saving Time (you should only have to set it once). You may
select which set of rules matches DST in your region, or simply accept
the default.
Once you have each field set the way you want, press
EXIT
repeatedly
until you return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, a alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS re-
ceiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. If you want,
you have the option of turning off the WAAS Acquired/Lost alarm with-
out affecting how the GlobalMap 3200 uses WAAS. Here's how:
1. Press
MENU
|
MENU
|↓ to
GPS S
ETUP
|
ENT
|↓ to
S
HOW
WAAS A
LARM
.
2. With the option highlighted, press
ENT
to uncheck it (turn off) and
check it (turn on.) After the option is set, press
EXIT
|
EXIT
to return to
the page display.
3. You can return to this command and press
ENT
again to turn the fea-
ture on.
Software Version Information
From time to time, Lowrance updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site, www.lowrance.com.
These upgrades make the unit perform better or introduce a new fea-
ture or function. You can find out what software version is running in
your GlobalMap 3200 by using the Software Information command.
System Setup command left; Software Information command, center.
At right, the Software Information screen.