Filter
Top Products
87
The command remains available in the unit's software, but we recom-
mend that you leave it in the default off (unchecked) mode. The "wan-
dering" plot trail issue has now been corrected by the Track Smoothing
feature. Turning on Position Pinning could actually result in an inaccu-
rate plot trail if you are moving around in a relatively small area. If you
want to experiment with Position Pinning, the same instructions are
used to turn the feature on (checked) and off (unchecked.)
1. Press
MENU
|
MENU
|↓ to
GPS S
ETUP
|
ENT
|↓ to
P
OSITION
P
INNING
|
ENT
.
2. Press
EXIT
|
EXIT
to return to the previous page.
Reset Options
To reset all features to their factory defaults:
1. Press
MENU
|
MENU
|↓ to
S
YSTEM
S
ETUP
|
ENT
|↓ to
R
ESET
O
PTIONS
|
ENT
|←
to
Y
ES
|
ENT
.
NOTE:
Reset Options does not erase any waypoints, routes, icons, plot trails or
sonar logs.
Reset Options command, left,
and the Reset Options Menu, right.
Require DGPS
You can force the GlobalMap 3200 to require DGPS for reporting a
valid position. (The default setting, off, uses DGPS automatically when
an optional DGPS beacon receiver is connected. However, this auto
mode doesn't require DGPS reception to yield a position.) Here's how to
turn mandatory DGPS on and off.
1. Press
MENU
|
MENU
|↓ to
GPS S
ETUP
|
ENT
|↓ to
R
EQUIRE
DGPS
|
ENT
.
2. To return to the last page displayed, press
EXIT
|
EXIT
.
3. You can return to this command and press
ENT
again to turn the fea-
ture off.