Filter
Top Products
93
From the Trails Menu, press → to
O
PTIONS
|
ENT
. With
U
PDATE
A
CTIVE
T
RAIL
highlighted, press
ENT
to check it (turn on) and uncheck it (turn off.)
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're travel-
ing in a straight line. Once you deviate from a straight line, the GlobalMap
3200 "drops" a plot point (trail waypoint) onto the trail. This conserves plot
trail points. If a plot trail uses all of the available points allotted to it, the
beginning points are taken away and placed at the end of the trail.
From the Trails Menu, press → to
O
PTIONS
|
ENT
|↓ to
U
PDATE
C
RITERIA
.
Press
→
or
←
to select criteria type|ENT.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mi.
With one of the Update Criteria selected, use the cursor arrows to
highlight either the
U
PDATE
R
ATE
or
U
PDATE
D
ISTANCE
data entry boxes and
press
ENT
. Press ↑ or ↓ to change the first character, then press → to
the next character and repeat until the entry is correct. Press
EXIT
to
return to the Trail Options Menu.
Trail Options menu: Update Time Rate setting, left, and Update Dis-
tance setting, right.
Specific Trail Options
Delete Trail
To delete a specific trail: From the Trails Menu, press ↓ to Trail
Name|
ENT
. The Edit Trail menu appears as seen in the following fig-
ure. Press → to
D
ELETE
T
RAIL
|
ENT
|← to
Y
ES
|
ENT
.