Garmin DA40F GPS Receiver User Manual


 
Garmin G1000 Cockpit Reference Guide for the DA40/40F
SECTION 7 – NAVIGATION
7-8
7.11 NEAREST VOR
Select the Nearest VOR Page
1) Turn the large
FMS
Knob to select the ‘NRST’
page group.
2) Turn the small
FMS
Knob to select the fourth
rectangular page icon.
Figure 7-13 Nearest VOR Page
View Information on the Nearest VOR
1) With the Nearest VOR Page displayed, press
the
VOR
Softkey to place the cursor in the
‘NEAREST VOR’ Box.
2) Turn either
FMS
Knob to select a VOR.
3) Press the
FMS
Knob to remove the flashing
cursor.
Select and Load a VOR Frequency
1) With the Nearest VOR Page displayed, press the
FREQ
Softkey to highlight the VOR frequency
in the ‘FREQUENCY’ field.
2) Press the
ENT
Key. The selected VOR frequency
is placed in the NAV standby frequency field.
3) Press the
FMS
Knob to remove the flashing
cursor.
7.12 NEAREST USER WAYPOINT
Figure 7-14 Nearest User Waypoints Page
Select the Nearest User Waypoint Page
1) Turn the large
FMS
Knob to select the ‘NRST’
page group.
2) Turn the small
FMS
Knob to select the fifth
rectangular page icon.
Select a Nearest User Waypoint
1) With the Nearest User Waypoint Page displayed,
press the
FMS
Knob to activate the cursor. If
any previously entered User Waypoints are
within 200 nm, these will be displayed with
the closest listed first.
2) Turn either
FMS
Knob to select the desired
waypoint. The remaining information on the
Nearest User Waypoint Page pertains to the
selected Nearest User Waypoint.