Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the DA40/40F
12-17
SECTION 12 – ANNUNCIATIONS
& ALERTS
Miscellaneous Message Advisories (Cont.)
Alerts Window Message Comments
SLCT AUTOSEQ
– Select auto
sequence mode.
The system notifies the pilot to select auto-sequence mode. Press the OBS Softkey to
deactivate the OBS mode.
SLCT FREQ – Select appropriate
frequency for approach.
The system notifies the pilot to load the approach frequency for the appropriate NAV
receiver. Select the correct frequency for the approach.
SLCT NAV – Select NAV on
CDI for
approach.
The system notifies the pilot to set the CDI to the correct NAV receiver. Set the CDI
to the correct NAV receiver.
NO WGS84 WPT – Non WGS 84
waypoint for navigation -[xxxx]
The selected waypoint [xxxx] does not use the WGS 84 datum. Cross-check position
with alternate navigation sources.
TRAFFIC FAIL – Traffic device has
failed.
The G1000 is no longer receiving data from the traffic system. The traffic device
should be serviced.