Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the DA40/40F
1-9
SECTION 1
SYSTEM OVERVIEW
6) Turn the large FMS Knob to highlight ‘MFD
DSPL > AUTO’ and repeat steps 3 through 5.
Figure 1-8 PFD Setup Menu Window
1.6 XM RADIO - AUTOMATIC MUTING
XM Radio audio will be automatically muted when the
aircraft groundspeed exceeds approximately 30 kts and
the airspeed is less than approximately 80 kts. The audio
must be manually unmuted once the aircraft is outside the
applicable speed range. Refer to the Additional Features
section of the G1000 Pilot’s Guide.
1.7 DATABASE UPDATES
Aviation Database Update
NOTE: The display downloads the aviation
database and stores it internally. The aviation
database SD card is not required to remain in
the display after the update.
1) With the G1000 System OFF, insert the aviation
database update SD card into the top card slot
of the PFD (Label of SD card facing left).
2) Turn the G1000 System ON. This prompt
is displayed on the upper left corner of the
PFD:
Figure 1-9 Database Update Prompt
3) Press the ENT Key to confirm the database
updated. This prompt is displayed:
Figure 1-10 Database Update Confirmation
4) After the update completes, the PFD starts in
normal mode. Remove the aviation database
update SD card from the PFD.
5) Turn the G1000 System OFF.
6) Repeat steps 1 through 4 for the MFD. The
MFD and PFD aviation databases are now
updated.
7) Verify that the correct update cycle is loaded
during startup of the MFD.
Terrain and Obstacle Database Updates
NOTE: The data contained in the terrain and
obstacle databases comes from government
agencies. Garmin accurately processes and
cross-validates the data, but cannot guarantee
the accuracy and completeness of the data.
NOTE: Obstacles 200’ and higher are included in
the obstacle database. It is very important to note
that not all obstacles are necessarily charted and
therefore may not be contained in the obstacle
database.