Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the DA40/40F
2-8
SECTION 2
FLIGHT INSTRUMENTS
When using GPS as the navigation source, the following
may appear:
• INTEG – GPS information is either not present or
is invalid for navigation use
• WARN – GPS detects a position error
• SUSP – Displayed when in OBS Mode indicating
GPS waypoint sequencing is suspended.
Figure 2-20 GPS INTEG, GPS SUSP, LOC1 and VOR2
Enable/disable OBS mode while navigating
with GPS:
1) Press the
OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course
TO/FROM the waypoint.
3) Press the OBS Softkey again to return to
normal operation.
NOTE: The OBS Softkey is only displayed when
navigating an active leg using GPS.
.