Garmin 100027303 GPS Receiver User Manual


 
Appendix E
55
None Found – A search through MapSource data, using the selected criteria, has produced no matching results.
Processor Failed – The unit has detected a fault in its internal processor. If this message persists, the unit is
unusable: return it to Garmin for service.
Route Data Transfer Complete – Route data has successfully been transferred to the unit.
Route Memory is Full – Route memory is full and no more routes can be saved or added (from another GPS
unit or a PC).
Route Truncated – The route has been truncated because it was too long. There are turns missing prior to the
destination.
Route Waypoint Memory is Full – There is no more space for map-based route waypoints (used for turns).
Safe Mode is Turned On – The action attempted is disabled while moving to prevent distractions from driving.
Sunrise, Switching to Day Mode – The map is switching to the Day Mode display.
Sunset, Switching to Night Mode – The map is switching to the Night Mode display.
That Route Name is Already Used – The route name you have entered is already being used by another route.
Too Many Maps on Data Card – The data card contains more maps than the unit software can process.
Track Data Transfer Complete – Track data has successfully been transferred to the unit.
Track Name Already Exists: <name> – The track you have entered is already used by another track. Choose a
different name.
Track Memory is Full – Track log memory is full. No additional track log data can be stored without deleting
old data to create memory space.
Track Truncated – A complete uploaded track will not fi t in memory. The oldest track log points were deleted
to make space for the most recent data.
Waypoint Data Transfer Complete – Waypoint data has successfully been transferred to the unit.
Waypoint Memory is Full – You have used all 500 waypoints available. Delete unwanted waypoints to make
space for new entries.
Waypoint Name Already Used – The waypoint name you have entered is already used by another waypoint.
Choose a different name.
Messages
2610_2650 OM.indd 55 8/1/2003, 4:16:41 PM